RM-364
RF troubleshooting
Next actions
If you want to troubleshoot the other bands, change band with RF controls and set the communication
analyser accordingly.
WCDMA transmitter troubleshooting
Steps
1. Set the phone to local mode.
2. In Phoenix, select Testing→WCDMA→TX control .
3. In the TX control window, make settings like in the picture:
4. Click Send to enable the settings and activate TX.
If settings are changed (eg. new channel), you have to click RF Stop and Send again.
Issue 1
COMPANY CONFIDENTIAL
Page 4 –17
Copyright © 2008 Nokia. All rights reserved.