Panasonic CS-XU10XKH Operating Instructions Manual page 14

How to Use
To set the timer
You can set the timer to turn on and off the unit at 2 different preset time.
1
1 Select TIMER ON
or TIMER OFF.
• Each time pressed:
2 Set the time.
3 Confi rm the setting.
Note
,
• Can be selected at the same time.
• Can be activated in all modes.
• Press the button again to cancel.
14
2 3
Example:
OFF at 22:00
(exit setting)
,
• To cancel the timer, press
select the respective setting
press .
• If the timer has been cancelled manually or
due to power failure, you can restore the
timer again. Press
the respective setting
.
• The nearest timer setting is displayed and
will activate in sequence.
• The timer operation follows the clock
setting on the remote control and will
repeat daily when timer has been set.
For clock setting, refer to Quick Guide.
,
• Cannot be selected at the same time.
or to
or , then
or to select
or , then press