Cleaning And Care - Silvercrest SWKC 3000 E3 Operating Instructions Manual

NOTE
► When filling it, hold the kettle upright . This is the only way to read the
markings on the scale 2 correctly .
3) Fill the jug at least as far as the MIN 0 . 7 l mark, so that the appliance does not
overheat, and no more than the MAX mark to ensure that no boiling water can
spill out .
4) First close the lid 1 and then place the kettle on the base 4 in such a manner
that it sits securely on the base 4 .
5) Now insert the plug into the mains power socket .
6) Push the ON/OFF switch 3 downwards so that it engages . The ON/OFF
switch 3 lights up .
WARNING! RISK OF INJURY!
► For safety reasons, you should never remove the lid 1 when the water is
boiling or is very hot . There is a risk of scalding .
7) As soon as the water is boiling, the appliance will switch itself off, the
ON/OFF switch 3 clicks upwards and the light goes out .
INFORMATION
► This appliance is fitted with an overheating protector: if the appliance is
switched on accidentally, without any water in the kettle, the appliance
automatically switches itself off .
If, for example due to a non-closed lid 1 the appliance boils dry, the
appliance switches off automatically .
In such cases first allow the appliance to cool down before using it again .

Cleaning and Care

RISK! ELECTRICAL SHOCK!
► Before cleaning, ALWAYS remove the plug from the mains power socket!
There is the risk of receiving an electric shock!
► Do not open any part of the housing . There are no user-serviceable
elements inside . An open housing will create the risk of a potentially fatal
electrical shock .
NEVER submerse the appliance in water or other liquids! You could
receive a fatal electric shock if residual liquids come into contact with
live components during operation .
■ 8 │ GB │ IE SWKC 3000 E3