RAVEMEN PR1200 - Wireless Switch Control Headlight, 1200 Lumens Manual

Performance Parameters

Mode	Brightness level	Brightness (Lumens)	Run Time (hrs)	Max distance	Impact resistance	Waterproof
Road Biking	High	600	3.5	142 meters	1 meter	IPX8 Underwater 2m
	Mid	400	5
	Low	200	9.5
	Eco	100	21
	Pulse flashing	100	13
Mountain Biking	High	1200	2
	Mid	600	3.5
	Low	300	8.5
Emergency	Turbo	1200	/

Notes:

1. The above data are tested in Lab in line with ANSI/NEMA FL1 standard and may vary by environment and user conditions;
2. Only the low beam will be on in Road Biking mode; Both the high beam and the low beam will be on in Mountain Biking and Emergency modes;
3. To meet IPX8 waterproof standard, please make sure the tail USB and Micro USB caps are securely mounted after usage.

Quick Guide

NO.	Item	Description
1	Low beam	Engineered DuaLens optical design for road biking and providing anti-glare closed range flood light, perfect for commuting.
2	High beam	Provides far reaching beam in Mountain Biking and Emergency modes.
3	Power button	Long press the button.5s to turn on/off power. Single click for mode changing between Road Biking and Mountain Biking modes.
4	Menu button	When power is on, single click to change brightness levels in Road Biking or Mountain Biking modes. When power is on, press the button 0.3s and hold to activate Emergency mode, release to go back to previous mode and brightness level.
5	LED runtime display	The display refreshes at intervals of: 1 hour when remaining runtime is above 10 hours; 0.5 hour when remaining runtime is above 1 hour and below 10 hours. If the readout is 1.0, the actual runtime is between 1.0 hours and 1.5 hours; 0.1 hour when remaining runtime is below 1 hour. Low battery indicator: A "Lo"signal will flash when the light is running out of power. Note: The LED display will flash firstly when the light is turned on for calibration. The remaining runtime is calculated under the current brightness and will vary along with the brightness changing.
6	Mode indicators	When icon is on, the light is in Road Biking Mode; When icon is on, the light is in Mountain Biking Mode.
7	USB output port	Max output: 5V, DC/1.5A,use as power bank to charge digital products: cell phone, tablets, MP3/MP4, etc; built-in over-discharge protection; The LED display will show "CC" when charging the connected device.
8	USB C input port	Max input: 5V, DC/ 1.5A; built-in over-charge protection. Connect with the wired remote button.
9	Wired remote button	Plug into the USB C port: When power is on, single click to change brightness levels in Road Biking or Mountain Biking modes. When power is on, press the button 0.3s and hold to activate Emergency mode, release to go back to previous mode and brightness level.
10	Other features	Intelligent thermal management circuit to prevent overheat of LEDs. Intelligent Memory circuit remembers the last used brightness level and mode when turned on again.

Mounting Your Light

Battery Charging

Standard charging time: 5.5h (5 V, DC/ 1.5A), approximate values and may vary by user conditions.
The LED display will flash in the form of marquee sign during charging process, and the screen will display number 88 when charging is completed.
Note: the light cannot be turned on or used while charging.

Attention!
For your safety, please read this manual thoroughly and use your light accordingly.
Make sure the Light is mounted securely on the handlebar each time before riding.
Release the bike light from the handlebar mount while in the outdoors in case of theft.
To maintain the best performance and extending the life of the Lithium-ion battery:

1. Check the battery and charge the battery up before your first riding.
2. Avoid completely discharging, allow partial discharges and avoid over charging (usually).
3. Keep and storage your light at room temperature.
4. Charge your light to 50% full every 3 months for long term storage.
5. Make two complete charging and discharging cycle to calibrate the led display after long term storage.

Alert!
Don't stare the light directly when on, otherwise it may cause temporally blindness. For others' safety, don't shine the light(high beam) directly to oncoming vehicles and pedestrians.
Keep the light away out of Children's reach. And children should be accompanied by adults when using the light.
Don't disassemble or modify the light, otherwise it may cause danger and void your warranty.

Lithium-ion battery inside, don't put the light in a fire, otherwise it may cause explosion!
Please charge the light with qualified USB power adapter, using defective USB power adapter may cause power leakage or fire disaster, etc. Ravemen is not responsible for any of such consequences.

Technical Specifications

LED: 2*CREE XM-L2 with a lifespan of 50000 hours
Battery: 5200mAh/3.7V rechargeable Lithium-ion battery
Dimensions (Headlight): 100mm (L)*48mm (W)*27mm (H)
Weight (Headlight): 213g
Materials: The front and main body is made by aluminum with Mil Type III Hard Coat Anodizing; the rear part and the handlebar mount are made by durable plastic
Package includes: front bike light*1, handlebar mount*1, thick silicone shim*1, thin silicone shim*1, USB cable*1, wired remote button*1, O ring *2

For your safety, read this manual thoroughly before using the product and keep it properly for future reference.
Scan and like our facebook page for more info and service:

Website: www.ravemen.com
Tel/Fax: +86-755-29064166
Email: service@ravemen.com