Specification - LG 32LG500H Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec. sheet is applied all of the 32", 37", 42" with LA66A
chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature : 20 ± 5°C
(2) Humidity : 65% ± 10%
(3) Power : Standard input voltage (100-240V~, 50/60Hz)
*Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
4. General Specification(TV)
No
1 Receiving System
2 Available Channel
3 Input Voltage
4 Market
5 Screen Size
6 Aspect Ratio
7 Tuning System
8 LCD Module
9 Operating Environment
10 Storage Environment
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATION

Item
3. Test method
(1) Performance : LGE TV test method followed
(2) Demanded other specification
Safety : UL, CSA, IEC Specification
EMC : FCC, ICES, IEC Specification
Specification
VSB/64 & 256 QAM/ NTSC-M
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
1) AC 100-240V~, 50/60Hz
NORTH AMERICA
32 inch Wide
16:9
FS
LC320WXN-SBA1(vitiaz-4)
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp. : -20 ~ 50 deg
2) Humidity : 10 ~ 90 %
- 6 -
Remark
LG Philips LCD
LGE Internal Use Only