Table of Contents
Advertisement
5.
Fit the corner section back into the backplate
6.
Fit the front cover back into position making sure the
knobs are aligned correctly with the flow valve and
power selector (see diagram 10).
Start by locating the "tang" around the recess for the
outlet pipe, and then "roll" the front cover over the
knobs and onto the top of the backplate.
Secure the top and bottom fastening screws.
7.
Operate the shower first without the handset to flush
out particles, fit the handset and then operate the
shower as on page 2 and check:
a. That the water gets to a satisfactory temperature.
b. Water flow can be adjusted by knob "C".
c. Power selection does give a change in water
temperature and power lights illuminate.
d. Check again for leaks
e. That the holes in the spray plate are not blocked
8.
DEMONSTRATE OPERATION TO USER.
Additional Accessories / Spare Parts
White 2 metre Shower Hose
1 metre Riser Rail
Extended Shower Control Lever
(Interchangeable with Control Knob)
WRAS listed Water Isolating Valve
Curtain and Rail Pack
Curtain and Rail Pack with Non-Slip Mat
Spare 1.25m long Chrome Shower Hose
Spare parts/accessories can be supplied against any Credit or Debit cards from 0844 372 7750
This appliance is not intended for use by persons (including children and the infirm) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Catalogue No. 83-593529
Catalogue No. 83-593530
Catalogue No. 83-590710
Catalogue No. 93-792452
Catalogue No. 83-792802
Catalogue No. 83-792801
Catalogue No. 93-797641
7
Advertisement
Table of Contents
