Acer Vero V7 V247Y E User Manual page 27

System
Mode - Standard
Picture
Input
Color
Auto Source
DP Format
Audio
Performance
Wide Mode
OSD
PIP/PBP
Hot Key Assignment
System
DDC/CI
HDMI Black Level
Move Enter
Quick Start Mode
Mode - Standard
Picture
Quick Start Mode
1. Press the MENU key to open the OSD.
Color
2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the
Audio
right to navigate to the element you wish to adjust and press the joystick to enter it.
Performance
OSD
3. Toggle to the left or right to control functions.
System
4. Input: Select the source from VGA IN, HDMI1.4, DP.
5. Auto Source: The default is "On", which can support auto search for signal source in
Move Enter
order.
Quick Start Mode
Note: Surround application must set Auto Source is "Off".
6. Wide mode: You can select which screen aspect you are using. The options are Aspect
and 1:1.
7. Hotkey Assigment: Select the function of shortcut key 1(Modes, Volume, Brightness,
Gamma, Contrast, Low Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume,
Brightness, Gamma, Contrast, Low Blue Light, Over Drive).
8. DDC/CI: Allows the monitor settings to be set through the software on the PC.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note: DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
9. HDMI Black level: Select to set HDMI1.4 black level.
10. Quick start mode: Select Off or On. Turn on to speed up boot speed.
HDMI1
On
DP1.2
Full
X
On
Normal
Off
X