Installation - Acer V173 Service Manual

Hide thumbs Also See for V173:

Table of Contents

Installation

To install the monitor on your host system, please follow the steps below:

Steps

1 Connect the video cable

A：Make sure both the monitor and computer are switched off.

B：Connect the VGA video cable to the computer.

C：Connect the digital cable (only for dual-input models).

(1) Make sure both the monitor and computer are switched off.

(2) Connect one end of the 24-pin DVI cable to the back of the monitor and the other end to the computer's port.

2 Connect the power cord

Connect the power cord to the monitor, then to a properly grounded AC outlet.

3 Turn on the monitor and computer

Turn on the monitor first, then the computer. This sequence is very important.

4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem.

Table of Contents