Power Soak PSI6-84L-30-208-1PH Operator's Manual

Advertisement

OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
This manual provides information on installation, operation, maintenance, trouble
shooting & replacement parts for:
POWER SOAK INTRO,
CONTINUOUS MOTION
WARE WASHING
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ, UNDERSTAND
AND FOLLOW THE INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL.
WARNING / FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in
the vicinity of this or any other appliance.
WARNING
Improper installation, adjustment, alteration, service or maintenance
can cause property damage, injury or death. Read the installation,
operating and maintenance instructions thoroughly before installing
or servicing this equipment.
NOTIFY CARRIER OF DAMAGE AT ONCE
It is the responsibility of the consignee to inspect the container upon receipt of same and to deter-
mine the possibility of any damage, including concealed damage. Power Soak suggests that if you
are suspicious of damage to make a notation on the delivery receipt. It will be the responsibility of
the consignee to file a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 888-994-7636.
Information contained in this document is known to be current and accurate at the time
of printing/creation. Power Soak recommends referencing our product line websites,
unifiedbrands.net, for the most updated product information and specifications.
PART NUMBER 44676, REV C (08/23)
888-994-7636, fax 888-864-7636
unifiedbrands.net

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PSI6-84L-30-208-1PH and is the answer not in the manual?

Questions and answers

Summary of Contents for Power Soak PSI6-84L-30-208-1PH

  • Page 1 It is the responsibility of the consignee to inspect the container upon receipt of same and to deter- mine the possibility of any damage, including concealed damage. Power Soak suggests that if you are suspicious of damage to make a notation on the delivery receipt. It will be the responsibility of the consignee to file a claim with the carrier.
  • Page 2 Every system is manufactured to last, with only high-quality, heavy-duty, 14 gauge stainless steel used in its construction. All electrical components used in a Power Soak system are of the highest quality. The faucets and drains are designed for quick filling and emptying of the system’s sinks.
  • Page 3: Equipment Description

    If any or all of the Power Soak Basic is returned to the source where it was purchased, there will be no obligation for the Power Soak representative to make any compensation for the returned materials.
  • Page 4: Operation

    WARNING After the sinks have been filled with water, add the proper amount of detergent and A very useful optional accessory for your Power Soak Basic is the Advanced Wash Insert. THE POWER SOAK BASIC REQUIRES A LOW- If your machine is equipped with an AWI, start by installing it. Refer to AWI Owners Manual sanitizer.
  • Page 5 MUST BE WASHED BY HAND WITH THE back into the wash sink for additional cleaning. items to sit and air dry. The quicker that items are brought to the Power Soak and put in PUMP MOTOR TURNED OFF. WASH, RINSE the wash tank, the easier they are to clean.
  • Page 6: Maintenance

    TURN OFF THE POWER TO THE POWER SOAK THAT THE FACILITY OWNER OR MANAGER • Check to make sure the main electrical power breaker for the Power Soak Basic BASIC AT THE MAIN BREAKER PRIOR TO CAN PERFORM IS LISTED IMMEDIATELY Clean the pump motor fan shroud with a damp, soapy rag each month.
  • Page 7: Service Log

    Service Log Model No: Purchased From: Serial No: Location: Date Purchased: Date Installed: Purchase Order No: For Service Call: Date Maintenance Performed Performed By OM-POWER SOAK...

This manual is also suitable for:

Psi6-84l-30-230-1phPsi6-84r-30-208-1phPsi6-84r-30-230-1phPsi6-90l-36-208-1phPsi6-90l-36-230-1phPsi6-90r-36-208-1ph ... Show all

Table of Contents