Table of Contents
Advertisement
CLEANING & CARE
This unit has been designed to be as maintenance-free as possible, but there are a few
simple things you must do to keep it functioning properly.
Test each alarm at least once a week
Keep at arm's length distance to the alarm during the test The alarm is loud in order to alert
you in case of an emergency and can be harmful to your ears, Press the Test/Hush button
for a duration of two seconds, The alarm will sound a few short loud beeps, upon releasing
the button, the sound will stop, The app will receive a test signal after 10 seconds.
Reset the alarm
If the test does not function properly, reset the alarm.
If the test does not function properly after completing these steps, contact help.Kogan.com
for support.
Cleaning
Clean the smoke alarm at least once a month; gently vacuum the outside of the smoke
alarm using your household vacuum's soft brush accessory. Test the smoke alarm after
cleaning. Never use water, cleaners or solvents since they may damage the unit.
If the smoke alarm becomes contaminated by excessive dirt dust and/or grime and gives
unwanted alarms, replace the unit immediately.
14
Test/Hush
button
Advertisement
Table of Contents
