Thermador SAVOR BICM24CS Use And Care Manual page 30

ADD
WATER
TURN ON
WATER
UNIT DE-
SCALING
TURN ON
COFFEE
UNIT DE-
SCALING
EMPTY CLEAN
TRAYS CONTACTS
UNIT IS
RINSING
COFFEE
Draining hot water
SYSTEM
TOO HOT
30
q Rinse out the water tank, fill with fresh water up
to max and re insert.
q Empty the receptacle and place back under the
nozzle.
q Set function selector to 0 position.
Note: The appliance is automatically rinsed. Water
flows at intervals into the receptacle. Wait for the next
message on display (approx. 4 minutes).
q Set function selector to U position.
Note: The appliance is automatically rinsed. Water
flows at intervals into the tray 23. Wait for the next
message on display (approx. 4 minutes).
q Empty tray 23 and coffee dreg tray 21.
q Clean and dry contacts 25.
q Re insert tray 23 and coffee dreg tray 21.
q Wipe splashes off the nozzle and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated
ring on 4 descaling goes out. The appliance is
ready for use again.
The descaling program requires a specific water
temperature before it can start. If the water
temperature is too high, drain hot water first!
q Place a receptacle under the nozzle.
q Set function selector to 0 position.
Water runs into the receptacle.
q Set function selector to U position.
The required temperature has been reached.
The descaling process can start.