Standby Mode; Displaying Number Of Brews - Thermador SAVOR BICM24CS Use And Care Manual

Standby mode

OFF IN
4 HOURS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
OFF IN
Ä Ä Ä Ä Ä Ä Ä Ä Ä
2 HOURS
Ä Ä Ä Ä Ä Ä Ä Ä Ä
Displaying number
of brews
NO.BREWS
- - - 86
RESET function
22
De activating the setting:
q Set the time to --:-- with < or> .
Note: The current time must be set for this function to
run.
i The switch on time is retained even if there
is a power failure or the main power switch 1
is turned off.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
q Hold down button % on display for at least
3 seconds.
q Select OFF IN with < or>.
q Press button %, hours display flashes.
q Change the setting with < or >.
q Press button % to save the setting.
q Press the 6 button. Back to standby.
i The switch off time is retained even if there is a
power failure or the power switch 1 is actuated.
The number of brewed espressos, coffees and
preground coffees is displayed here. The number of
brews are counted automatically.
q Hold down button % on display for at least
3 seconds.
q Select NO.BREWS with< or>.
q Press the 6 button. Back to standby.
i This number cannot be changed!
Possible from standby" mode only
q Simultaneously hold down < and > for at
least 3 seconds all saved settings are deleted.
i The display indicates the messages in the German
language after the RESET function.