Statement of Compliance Chauvin Arnoux , Inc. d.b.a. AEMC Instruments ® ® using standards and instruments traceable to international standards. We guarantee that at the time of shipping your The recommended calibration interval for this instrument is 12 months and begins on the date of receipt by the customer.
Page 4
TABLE OF CONTENTS 1.1 PRECAUTIONS FOR USE ............7 1.2 RECEIVING YOUR SHIPMENT..........8 1.3 ORDERING INFORMATION ............. 8 1.3.1 Accessories and Replacement Parts..........8 2.1 DESCRIPTION ................9 2.2 CONTROL FEATURES ............10 2.2.1 Front Panel Interface ..............10 2.2.2 LCD Display.................
Page 7
Use protective equipment when required Do not apply or remove the sensors from hazardous live parts or systems If hazardous voltages are present at the location of measurement, use suitable personal protective equipment Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www.
Page 8
Cable - 10 ft USB Type A to Type B ..........Cable - 6 ft USB Type A to Type B (Waterproof) for Models DL913 and DL914 ............Battery - Rechargeable Battery Pack, 4.2 A·h NiMH for Models DL913 and DL914 ............
Page 9
The Models DL913 and DL914 are easy-to-use, rugged data loggers that can be used both indoors and outdoors. Recorded data is stored in the instrument’s internal memory. This data can then be downloaded to a computer using a Wi-Fi or USB connection. Then, the data can be analyzed using the Data Logger Control Panel.
Page 12
Please reference § 3.3 for instructions to erase memory through the Control Panel. Batte : The battery must be charged. : The battery is partially charged. Filled : The battery is fully charged. Blinking: The battery is charging. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Page 14
The Data Logger Control Panel is the primary interface for setting up and operating the Models DL913 and DL914. Setup tasks include the following: Connecting the instrument to the computer Setting the instrument date and time Selecting parameters, like the aggregation period and communication options...
Page 16
The 300 A range provides better resolution but lower measurable current. You This screen will also show 1, 2, or 3 turns to indicate the instrument’s You can c only. 2. Press to toggle between 300 A and 3000 A. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Page 20
Can be changed to either 300 or 3000 A via the Front Panel or the Data Logger Control Panel. Number of sensor wraps is only adjustable in the Data Logger Panel. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Page 24
8. If you want to review or change any of your previous selections before installation, click . Otherwise, click Install. If your computer does not have any previous versions of the software Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www.
Page 25
The connected instrument will appear on the left side of the screen in the Data Logger Network frame. A green check mark next to the instrument’s name indicates that it is connected. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www.
Page 26
You can also locate this information in the Control Panel’s status frame. 7. Click the button at the top of the Status frame. The Add an Instrument wizard will appear. 8. Select Next. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Page 27
6. Press Finish to exit the Add an Instrument wizard. The connected instrument will appear on the screen’s left side in the Data Logger Network frame. If connected, green check mark will be next to the instrument’s name. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www.
Page 30
Extended recording mode: 7 days to 30 days* (*Depending on the selected aggregation period) Reference the table in § 3.2.3.3 for more in-depth information regarding the battery life, aggregation period, storage interval, and recording modes. Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Page 31
(5.9 x 5.9 x 3.57) in (150 x 150 x 91) mm w/o sensors DL913: 2.2 lb (1 kg) DL914: 2.42 lb (1.1 kg) 3 (DL913) or 4 (DL914) integral 24 in (610 mm) MiniFlex ® probes with 6.5 ft (2 m) leads 7.64 in (190 mm)
Page 33
If a malfunction occurs within the warranty period, you may return the instrument to us for repair, provided we have your warranty registration information on ® Instruments will repair or replace the faulty material at our discretion. REGISTER ONLINE AT: Data Logger Model DL913 & DL914 1.800.561.8187 information@itm.com www. .com...
Need help?
Do you have a question about the DL913 and is the answer not in the manual?
Questions and answers