Table of Contents
Advertisement
Troubleshooting
Operation
Problem
Transmission
No Transmit (TX) Callers cannot
hear me or speech recognition
software does not hear me.
No Receive (TX) No incoming
sound.
ModCom One Corded Reference Guide. V2
Possible Solution
Make sure 3.5 mm audio connector is
completely plugged into ModCom One audio
port.
Make sure 3.5 mm audio connector is
completely plugged into phone.
Make sure Quick Disconnect (QD) adapter, if
purchased, is properly connected to device's QD
adapter. Verify that QD pins are not damaged.
Make sure 3.5 mm audio connector is
completely plugged into ModCom One audio
port.
Make sure 3.5 mm audio connector is
completely plugged into phone.
Make sure Quick Disconnect (QD) adapter, if
purchased, is properly connected to device's QD
adapter. Verify that QD pins are not damaged.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the ModCom One and is the answer not in the manual?