Troubleshooting - Trident ModCom One Quick Start Manual

ModCom One™ Quick Start Guide

Troubleshooting

Operation Problem
Operating Headset will not Turn On
Pairing Does not Pair
Headset appears to be paired but
cannot communicate with intended
Bluetooth Device
Charging Battery Battery does not seat properly in the
Charging Slot
No LED's Light on Charger when
Battery is inserted
Trident Communication Technology™ Company Confidential
Possible Solution
Make sure Battery is fully seated in
Headset.
Make sure Battery is charged by placing
Battery in Battery Charger and following
the Battery charging instructions.
Headset should be off when beginning
pairing process.
Make sure intended Bluetooth Device is
on.
Make sure Headset is within 12 inches of
intended Bluetooth Device.
Make sure you select "ModCom One" on
your Bluetooth Device search menu.
Headset may be connected with
incompatible Bluetooth Device.
1. Make sure intended Bluetooth
Device is within 12 inches of
Headset.
2. Make sure all other non-intended
Bluetooth Devices are 6 feet away
from Headset.
3. Turn off Headset and start pairing
process again.
Rotate Battery and re-insert into Charging
Slot.
Check Power Cable connection to Charger.
Battery may be faulty. Replace Battery.
7