Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CYP CED-2M
Summary of Contents for CYP CED-2M
- Page 1 CED-2M 4K UHD+ EDID Manager Operation Manual Operation Manual...
- Page 3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
- Page 4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 5: Table Of Contents
CONTENTS 1. Introduction ..........1 2. Applications ........... 1 3. Package Contents ........ 1 4. System Requirements ......1 5. Features ..........2 6. Operation Controls and Functions ..3 6.1 Front Panel ........3 6.2 Rear Panel .........4 6.3 OSD Menu .........5 7. -
Page 6: Introduction
1. INTRODUCTION This 4K UHD HDMI EDID Emulator is designed to manage and manipulate the EDID information provided to a connected HDMI source device. EDID contains critical information about the capabilities of the connected display, including audio and video format support, HDMI feature support, etc. and this unit aims to simplify the technical complications that often arise when performing video system integration, home theater installation, display room setup, or audio/video equipment testing. -
Page 7: Features
5. FEATURES • HDMI input and output with 18Gbps (600MHz) 4K UHD support • DVI 1.0 compliant with the use of an HDMI-DVI adaptor • HDCP 1.4 and 2.2 compliant • Supports HD resolutions up to 3840x2160@60 Hz (4:4:4, 8-bit) & 4096x2160@60 Hz (4:4:4, 8-bit) •... -
Page 8: Operation Controls And Functions
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel User HDCP Ver. MENU – ENTER Internal HDCP Mode EDID MODE INFO LEDs 1~8: These LEDs illuminate to indicate which EDID from the currently selected EDID mode is active. Internal: This LED will illuminate when the unit is in Internal EDID mode. -
Page 9: Rear Panel
through the available EDIDs from 1 to 8. +/MODE: Press to move up or adjust selections within OSD menus. While not in a menu, press this button to sequentially switch through the available EDID modes (User, Internal and External bypass). ENTER/INFO: Press to confirm a selection within the OSD or to go deeper into a menu item. -
Page 10: Osd Menu
6.3 OSD Menu First Layer Second Layer Third Layer Internal EDID Mode User External 1: 1080P@60/8/RGB/LPCM 2: 4K2K_30/8/RGB/LPCM 3: 4K2K_30/8/YUV/Bitstream 4: 4K2K_30/12/RGB/HDR/LPCM EDID Select 5: 4K2K_30/12/YUV/HDR/Bitstream 6: 4K2K_60_Y420/8/LPCM 7: 4K2K_60_Y420/8/Bitstream 8: 4K2K_60/8/RGB/LPCM EDID Emulator 1: DVI/1080P 2: 1080P@60/8/3D/YUV/Bitstream 3: 1080P@60/8/YUV/Bitstream 4: 4K2K@60/8/RGB/Bitstream Copy TV EDID 5: Star... - Page 11 DISPLAY INFORMATION : ON, OFF OSD TIMEOUT : OFF, 5 ~ 40 SEC (10) RESOLUTION HDCP MODE HDCP OUTPUT INFORMATION HDMI IN +5V EDID MODE FIRMWARE SINK INFO. FACTORY DEFAULT Default settings are marked in a bold italic font.
- Page 12 6.4 EDID Management This unit uses an EDID Management application which allows the user to copy the EDID from an attached display, edit an existing EDID file stored on the PC or create a basic EDID from scratch. The EDID can then be uploaded to the unit for use.
- Page 13 EDID Controller Tab Mode Select: Under the EDID Controller tab the user may select the EDID to be sent to the connected HDMI source from 8 Internal, 1 Exter- nal (bypass) or 8 User EDID options. When selected, the LED lights on the unit will change accordingly.
- Page 14 Save/Upload/Analysis: EDIDs may also be saved, uploaded or ana- lyzed. • Any EDID from the unit or a connected HDMI display can be saved to your PC as a *.bin file by selecting the EDID source from the drop down menu and then clicking the “Save” icon. • Previously saved EDID files (*.bin format) can be re-uploaded into any of the “User”...
- Page 15 EDID Creator Tab Click on the EDID Creator tab to begin designing a new EDID from scratch (select the “New” icon), to modify an existing EDID stored on the PC as a .bin file (select the “Load” icon) or to edit an EDID copied from the unit via the EDID Analyzer’s edit option.
- Page 16 The following tabs provide access to a wide range of EDID information which can be edited: • Descriptor: This tab allows for the editing of various description and information fields within the EDID file such as Manufacturer Name, Monitor Name, etc. • PC Timing and SD/HD/UHD: These tabs allow for the selection of the resolutions and refresh rates that the EDID will report as sup- ported.
-
Page 17: Connection Diagram
7. CONNECTION DIAGRAM HDMI OUT HDMI IN POWER DC 5V DVD or Blu-ray Player UHD TV PC or Notebook... -
Page 18: Specifications
8. SPECIFICATIONS 8.1 Technical Specification Video Bandwidth 600MHz/18Gbps Input Ports 1 x HDMI, 1 x Mini-USB Output port 1 x HDMI Power Supply 5VDC/2.6A (US/EU standards, CE/FCC/UL certified) ESD Protection Human Body Model: ±8KV (Air Discharge), ±4KV (Contact Discharge) Dimensions 110mm x 25mm x 75mm (W×H×D) [Case Only] 128mm x 25mm x 83mm (W×H×D) [All... -
Page 19: Video Specification Support
8.2 Video Specification Support Supported Timings (Hz) Input Output 640x480@60/72/75/85 720x480@60 720x576p@50 800x600@56/60/72/75/85 1024x768@60/75/85 1280x720@50/60 1280x720p@60 1280x768@60/70/75/85 1280x800@60 1280x1024@60 1360x768@60 ... - Page 20 CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.tw MPM-CED2M...
Need help?
Do you have a question about the CED-2M and is the answer not in the manual?
Questions and answers