Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CYP CSR-8PSU-48V
Summary of Contents for CYP CSR-8PSU-48V
- Page 1 CSR-8PSU-48V 8-Port 48V DC Power Manager Operation Manual Operation Manual...
- Page 3 DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
- Page 4 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
-
Page 5: Table Of Contents
CONTENTS 1. Introduction ............1 2. Applications .............1 3. Package Contents ..........1 4. System Requirements ........1 5. Features ............2 6. Operation Controls and Functions ....2 6.1 Front Panel ..........2 6.2 Rear Panel ..........3 6.3 RS-232 Protocol .......... 4 6.4 RS-232 and Telnet Commands ....4 6.5 Telnet Control .......... -
Page 6: Introduction
1. INTRODUCTION This 8-Port 48V DC Power Manager is a DC power splitter which can distribute up to 300 milliamps of 48 volt power to up to eight connected devices via 2-pin terminal block connections (115 watts total across all 8 outputs). Ideal for professional applications, this unit provides direct per-port power control via WebGUI, Telnet or RS-232. -
Page 7: Features
5. FEATURES • Power management system providing voltage-controlled current (48V) on each output • Battery backed up clock for scheduling power events • Integrated WebGUI for control and power analysis • Unit’s overall maximum power consumption is only 143 watts •... -
Page 8: Rear Panel
6.2 Rear Panel 48V POWER OUT A B 12V SERV. CONTROL DC 48V 48V POWER OUT & LEDs 1~8: Connect power cables with 3.5mm 2-pin terminal blocks from units requiring 48V power. Up to 8 devices can be powered. When power is available from a port, the associated LED will be green. -
Page 9: Rs-232 Protocol
6.3 RS-232 Protocol UNIT REMOTE SYSTEM Definition Definition ► ◄ Baud Rate: 19200bps Data Bits: 8 Parity Bits: None Stop Bits: 1 Flow Control: None 6.4 RS-232 and Telnet Commands COMMAND DESCRIPTION AND PARAMETERS HELP Show the full command list. Show the full command list. - Page 10 COMMAND DESCRIPTION AND PARAMETERS REBOOT Reboot the unit. PWR N1 N2 Enable or disable power output N1. N1 = 1 ~ 8 [Port number] N2 = ON, OFF PWR N1 NAME N2 Rename power output N1. N1 = 1 ~ 8 [Port number] N2 = {Name String} [16 characters max]...
-
Page 11: Telnet Control
6.5 Telnet Control Before attempting to use Telnet control, please ensure that both the unit and the PC/Laptop are connected to the same active networks. To access the Command Line Interface (CLI) Click Start, type “cmd” in the search field, and In Windows 7 press Enter. -
Page 12: Webgui Control
6.6 WebGUI Control • Device Discovery APP Please obtain the Device Discovery software from your authorized dealer and save it in a directory where you can easily find it. Connect the unit and your PC/Laptop to the same active network and execute the Device Discovery software. -
Page 13: Status
• WebGUI Overview After connecting to the WebGUI’s address in a web browser, log into the unit by entering the appropriate user name and password. All primary functions of this unit are controllable via the built in WebGUI, including Status, Device Settings, Schedule, and System settings. -
Page 14: Device Settings
(4) System Fan: Displays the current state of 2 external fans (optional) including individual fan RPM, and the current fan speed thresholds, if auto mode is enabled. 6.6.2 Device Settings This tab provides controls for all 8 power output ports as well as control over the optional external fans’... -
Page 15: Schedule
6.6.3 Schedule The Schedule tab provides multiple ways to automate and schedule the powering on and off of any of the 8 power ports on this unit. (1) Repeat Mode: Items in this section will execute at their set times on the selected days (Sunday through Saturday) every week as long as they are marked as “Active”. -
Page 16: System Settings
6.6.4 System Settings This tab provides system configuration options including changing the network settings, downloading/restoring saved system configurations, modifying the username and password, system time setting, and updating the firmware. (1) Network: This section allows for setting the unit to either Static or DHCP mode for its IP information. -
Page 17: Connection Diagram
7. CONNECTION DIAGRAM RS-232 Equipped PC/Laptop RS-232 ISP/ RS-232 RESET 48V DC Power Manager 48V POWER OUT A B 12V SERV. CONTROL DC 48V UPDATE HQ/STD UPDATE HQ/STD UPDATE Power HQ/STD Supply UPDATE HQ/STD UPDATE HQ/STD UPDATE HQ/STD UPDATE HQ/STD UPDATE 48V Power 12V Power... -
Page 18: Specifications
8. SPECIFICATIONS Output Ports 8×48V Power [2-pin Terminal Blocks] 2×12V Power [4-pin Terminal Block] Control Interfaces 1×RS-232 [3.5mm] 1×IP Control [RJ-45] Baud Rate 19200bps Power Supply 48V/3.12A DC (US/EU standards, CE/FCC/ UL certified) ESD Protection Human Body Model: ±12kV (Air Discharge) ±8kV (Contact Discharge) Dimensions 211.5mm×24mm×112mm (W×H×D) - Page 20 CYPRESS TECHNOLOGY CO., LTD. www.cypress.com.tw...
Need help?
Do you have a question about the CSR-8PSU-48V and is the answer not in the manual?
Questions and answers