Table of Contents
Advertisement
INTRODUCTION
Read this manual carefully to learn how to operate and
service your machine correctly. Failure to do so could
result in personal injury and/or machine damage.
This standard specification machine can be operated
under the following conditions without being modified.
Atmospheric Temperature: -20 °C to 50 °C (-4 °F to 122 °F)
Altitude: 0 m to 2000 m (0 ft to 6600 ft)
In case the machine is used under conditions other than
described above, contact your authorized dealer.
This manual should be considered a permanent part of
your machine and should remain with the machine when
you sell it.
This machine is of metric design. Measurements in this
manual are metric. Use only metric hardware and tools as
specified.
• SI Units (International System of Units) are used in
this manual.
For reference MKS system units and English units are
also indicated in parentheses after the SI units.
Example : 24.5 MPa (250 kgf/cm², 3550 psi)
Right-hand and left-hand sides are determined by
facing in the direction of forward travel.
Write product identification numbers in the Machine
Numbers section. Accurately record all the numbers
to help in tracing the machine should it be stolen.
Your dealer also needs these numbers when you order
parts. If this manual is kept on the machine, also file the
identification numbers in a secure place off the machine.
Use only diesel fuel with quality specified in JIS K-2204,
EN-590 or ASTM D-975 which contents 15 ppm or lower
sulfur.
Also use fuel that complies with solid contamination level
of class 18/16/13 of ISO4406-1999 (solid contamination
includes dust). If the fuel specified above is not used,
exhaust gas that exceeds the regulation values may be
discharged, causing serious problem on the engine.
Contact your authorized dealer.
Warranty is provided as a part of Hitachi's support
program for customers who operate and maintain their
equipment as described in this manual. The warranty is
explained on the warranty certificate which you should
have received from your dealer.
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
This warranty provides you the assurance that Hitachi will
back its products when defects occur within the warranty
period. In some circumstances, Hitachi also provides field
improvements, often without charge to the customer,
even if the product is out of warranty.
Should the equipment be abused or modified to
change its performance beyond the original factory
specifications, the warranty will become void and field
improvements may be denied.
Setting fuel delivery above specifications or otherwise
overpowering machines will result in such action.
Moreover, when replacement parts are required, be sure
to use genuine Hitachi parts. Failure to do so may result in
voiding the warranty and/or denial of field improvements.
The Yellow Pages in this operator's manual contain
IMPORTANT SAFETY INFORMATION.
Read these pages thoroughly and familiarize yourself
with the safety standards and recommendations set
forth in these yellow pages of the manual.
Follow all safety instructions prior to and while
operating the excavator.
Only qualified, experienced operators officially licensed
(according to local law) should be allowed to operate the
machine.
Moreover, only officially licensed personnel should be
allowed to inspect and service the machine.
Prior to operating this machine, including
communication system, in a country other than a
country of its intended use, it may be necessary to
make modifications to it so that it complies with
the local regulatory standards (including safety
standards) and legal requirements of that particular
country. Please do not export or operate this machine
outside of the country of its intended use until such
compliance has been confirmed.
Please contact Hitachi Construction Machinery Co.,
Ltd. or any of our authorized distributor or dealer if
you have any questions concerning compliance.
©2019 Hitachi Construction Machinery Co., Ltd.
All rights reserved.
Find manuals at https://best-manuals.com
Advertisement
Table of Contents
