Table of Contents
Advertisement
Chapter 05
Configuring the PIP/PBP Settings
Function Key Guide →
→
PIP/PBP
A detailed description of each function is provided. Refer to your product for details.
― The functions available may vary depending on the product model. The color and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality.
PIP/PBP Mode
Enable or disable the
PIP/PBP Mode
function.
The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed
on the main screen at the same time the another source device is displayed in inset windows.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
―
PIP/PBP
mode is compatible with Windows 7, Windows 8, and Windows 10.
― The
PIP/PBP
function may not be available depending on the specifications of the graphics card used. If the
screen is blank in
PIP/PBP
mode when the optimum resolution is selected, go to Control Panel → Display →
Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.) If the screen is blank
when the resolution is set to the optimum resolution, change the resolution to 1280 x 1024.
― The screen may flicker briefly or appear after a delay when you enable or disable the
when you change the screen size with the
PIP/PBP
and a product are connected to two or more input sources. It has nothing to do with the performance of
a product. The issue is mainly caused when the video signals are delayed in transmission to the product
depending on the graphics card performance.
― To obtain optimum picture quality, it is recommended that a graphics card or DVD that supports the QHD
(2560 x 1440 @ 144 Hz) resolution be connected to the HDMI IN port.
To obtain optimum picture quality, it is recommended that a graphics card or DVD that supports the QHD
(2560 x 1440 @ 144 Hz) resolution be connected to the MINI DP IN port.
― When the
PIP/PBP
function is enabled, the resolution will not be able to automatically switch to the
optimum resolution due to a compatibility issue between the graphics card and the Windows system.
Set
PIP/PBP Mode
to Off. Alternatively, restart the product, then set the resolution to the optimum setting
using the Windows interface.
― If the product is set to an incompatible resolution, the product may display an abnormal or blank screen.
Change to a supported resolution by referring to the Standard Signal Mode Table.
PIP/PBP
function or
function activated. This can typically arise when a PC
30
Advertisement
Table of Contents
