The Singing Machine Bratz SMB-567 Instruction Manual page 17

TROUBLE SHOOTING GUIDE
PROBLEM
No sound - If audio is
connected to TV or
VCR.
No song lyrics appear
on screen.
No sound - If audio is
connected to home
stereo.
Picture is jumping up.
POSSIBLE CAUSE
Source Selection on TV or
VCR is not correct.
Patch cords are not
connected securely.
Video cable is not connected
properly to the TV.
Source selector on TV is not
set to VIDEO.
TV does not have video line
input.
A CDG is loaded but the
CDG indicator is not lit.
Source selector on TV is not
set to VIDEO.
Source Selection on your
stereo is not set properly.
Improper Connection to
stereo system or PA.
Patch cords are not secure.
VERTICAL HOLD Control is
not set correctly.
E16
SOLUTION
Follow directions on page E8 for
"Making the Connections".
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
TV/VCR.
Connect the video cable to the
Singing Machine's VIDEO OUT
and to the TV VIDEO IN.
Using your TV remote to select
VIDEO input.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
Modulator and then to the TV
cable input. Refer to "Making the
Connections" on page E8.
Check the disc to be sure it is a
CDG. (See page E18 for details.)
Check disc to be sure it is clean.
(See page E14 for cleaning
instructions.)
Use your TV remote to select the
proper VIDEO input or select the
proper VIDEO input on the TV
itself. (Refer to page E9 under
Common ways to configure your
TV or VCR)
Select AUX IN as the source for
your home stereo.
Follow direction on page E10 for
connecting to a home stereo
system.
Ensure white and red patch cords
are securely inserted into both
The Singing Machine and the
home stereo system.
Adjust the VERTICAL HOLD
Control.