Table of Contents
Advertisement
Available languages
Available languages
15
15A
15C
15 SPRAY HEAD INSTALLATION
Assemble Spray Head (15A) to Pullout Hose (15B) by turning the metal Hose Fitting
(15C) clockwise.
Caution: do not over tighten!
FAUCET FUNCTIONS
16
16A
16 SPOUT FUNCTION
The Spout (16A) can be rotated from side to side.
17
17A
HOT
COLD
17 VALVE FUNCTION
By lifting Lever Handle (17A) up, the valve will be activated allowing water to flow. The
water flow will increase by continuing to lift up Lever Handle (17A). By rotating Lever
Handle (17A) counterclockwise, the water temperature will decrease to fully cold. By
rotating Lever Handle (17A) clockwise, the water temperature will increase to fully hot.
15B
ON
17A
ENGLISH
18
18 PULL-OUT OPERATION
The Pull-Out Hose (18A) can be pulled forward to spray water in any direction.
19
19A
19B
19 SPRAY OPERATION
To activate the spray mode, simply press Toggle Button (19A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of
the Toggle Button (19A/19B) while the faucet is in operation.
Note: The faucet will always turn on in regular stream mode.
MAINTENANCE & CARE
20
20E
20D
20C
20 AERATOR CLEANING
Over time, the aerator in your faucet may become clogged with debris. To clean, unscrew
Aerator (20A) from Spray Head (20B) using a 7 / 8 " open ended wrench or adjustable
wrench. Separate Aerator Housing (20C), Aerator Basket (20D), and Flat Seal (20E).
Once parts have been cleaned, reassemble by reversing these steps.
5
18A
20B
20A
Advertisement
Table of Contents
