Table of Contents
Advertisement
Operating the appliance
en
Briefly touch } (Remote start).
■
Remote start will be
Note:
deactivated for safety reasons in the
following circumstances:
You open the door.
There is a power failure.
Once the programme has ended.
If you touch A on the appliance.
If you briefly touch } (Remote
start) again.
If you press # to switch off the
appliance.
Calling up Home Connect settings:
Touch and hold } (Remote start) for
■
at least 3 seconds.
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean programme.
~ "Before washing for the first time"
on page 20
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
36
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The Cotton programme, which is preset
at the factory, is then always displayed.
You can use this programme or select a
different programme.
Advertisement
Table of Contents
