Table of Contents
Advertisement
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean programme.
~ "Before washing for the first time"
on page 20
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Operating the appliance
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The Cottons programme, which is
preset at the factory, is then always
displayed.
You can use this programme or select a
different programme.
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the ~ "Programme default
settings" on page 32 and/or selecting
~ "Additional programme settings"
on page 33.
Placing laundry into the drum
Insert the laundry.
Close the door.
en
35
Advertisement
Table of Contents
