Mounting Lens - Nikon F50 Instruction Manual

MOUNTING LENS
1 Remove the camera body cap
and the front and rear lens
caps.
2
Position the lens in the
camera's bayonet mount so
the mounting indices on the lens
and the camera body are aligned.
Twist the lens counterclockwise
until it locks into place.
~
, I I /
I . : , ,- 1 _ _
- Err , ~
- 71-'
With a non-CPU lens
When the camera is
powered on with a non-
CPU lens, Err and
m
blink in
the LCD panel and E
~ ~
blinks inside viewfi nder.
For using a non-CPU lens,
see page 58.
Usable Lenses When mounting lens-
Use CPU lenses (AF Nikkor lenses and AF-S/AF-I/
AI-P lenses). Other Nikon and Nikkor lenses (non-
CPU lenses) can be mounted, but you have to use
an external exposure meter, and the only usable
exposure mode is Manual. (See page 58) .
• AF-SIAF-IIAI-P lenses
are
for manual focus only.
• Avoid direct sunlight.
• Make sure the camera's power is off.
• Do not touch the lens release button.
7