Advertisement
TROUBLESHOOTING:
EXPLODED VIEW:
PARTS LIST:
WIRING DIAGRAM:
!
Unplug unit from power source and allow to cool completely before performing any maintenance or cleaning.
Unit not working:
- Check power switch position, power cord and/or electrical circuit.
Display light not working:
- Tighten or replace bulb
Shelf light not working:
- replace bulb; see parts list for correct bulb
Unit not heating properly:
- Has food been prepared in advance and placed in warmer at proper serving temperature?
- Check heat settings. is it at the correct setting for your food product?
Food product is drying out:
- Are you placing food product directly on shelf? We recommend using the wire racks that were
supplied with your unit.
- Is your food product being left in the warmer past its shelf life?
Shelf life of product can vary greatly based on how item is packaged, temperature setting selected
on warmer and how it is placed into the warmer.
Acrylic is warping/melting:
- Only shatter resistant compact fluorescent light bulbs which meet or exceed NSF standards
designed specifically for food holding units must be used.
- Use 20W MAX teflon coated fluorescent bulb ONLY in top display light; see parts list
FAILURE TO DO SO WILL CAUSE DAMAGE TO UNIT
NOTES:
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
P .O. Box 10 • Oregon, WI 53575 • Ph: 608.835.3106 • Fx: 608.835.8273 • wiscoind.com • wiscomade.com
Advertisement
