GRAVITY GLSTB01 Manual

GLSTB01
Universal T-Bar for 35 mm stands

SAFETY INFORMATION

1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0

PROPER DISPOSAL OF THIS PRODUCT

(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to
promote sustainable economic activity.

FEATURES

Heavy duty die-cast T-joint
Lightweight aluminium tubing
Quick-locking clamping mechanism

OPERATION

This universal T-Bar allows you to convert any speaker stand or similar stand with 35
mm top tubing into a lighting stand. The aluminium tube allows the product to be
both lightweight yet sturdy. The rugged die-cast T-Joint ensures superior stability
and the quick-locking clamping mechanism allows the T-bar to be securely atta-
ched to the stand within seconds.

SPECIFICATIONS

Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Product type:
Type:
Fitting:
Material:
Surface:
Colour:
Length:
Max. power handling:
Weight:
Stands and Tripod Accessories
Lighting Stands
36 mm clamp
die-cast aluminium
powder coated
Black
1235 mm
50 kg
1.7 kg