Dialing The Same Receiving System (Redial) - Utax CD 1128 FAX Instruction Handbook Manual

Dialing the Same Receiving System (Redial)

Redial is a function allowing you to dial the last entered number once again.
Automatic Redial
This function automatically redials a receiving system that does not respond when you try to send fax.
No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular
interval, you do not need to worry even when the communication by the receiving system is prolonged.
NOTE:
When using direct transmission, the machine does not automatically redial.
You can change the number of automatic redials from between 0 and 14. For details, refer to Retry Times on
page 6-8.
You cannot send delayed transmission immediately while the machine is waiting for redial.
Manual Redial (Recall)
Use this when the receiving system does not respond when you have tried to send a fax. When you want to send
the fax to the same receiving system, press the Address Recall/Pause key, and you can call the receiving
system you dialed on the destination list.
Ready to send.
b :0987654321
YYYYYYYY
[XXXXXXXX] [XXXXXXXX]
OPERATION GUIDE
All manuals and user guides at all-guides.com
1
Dest.: 1
YYYYYYYY
NOTE:
address transmissions and computers and e-mail
destinations, they are also displayed. If necessary, add
or delete the receiving system.
2
NOTE:
conditions.
•
•
•
Press the Address Recall/Pause key. The
receiving system you dialed is displayed on the
destination list.
When the last transmission included multi-
Press the Start key. The transmission will start.
Recall information is canceled in the following
When you turn the power off
When you send a next fax (new recall information is
registered)
When you log out
FAX Operation (Basic)
3-27
3