Jbat1: Clear Cmos (Reset Bios) Jumper; Jlpt1: Parallel Port Connector - MSI X370 GAMING PRO Quick Start Manual

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer but DO NOT unplug the power cord (system under S5/
Soft-off mode)
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Power on the computer.

JLPT1: Parallel Port Connector

This connector allows you to connect the optional parallel port with bracket.
Keep Data
(default)
2
1
1 RSTB# 2
4 ERR# 5
7 PRND2 8
10 Ground 11
13 PRND5 14
16 Ground 17
19 ACK# 20
22 Ground 23
25 SLCT 26
Clear CMOS/
Reset BIOS
26
25
AFD# 3
PRND1 6
LPT_SLIN# 9
PRND4 12
Ground 15
PRND7 18
Ground 21
PE 24
No Pin
Overview of Components
PRND0
PINIT#
PRND3
Ground
PRND6
Ground
BUSY
Ground
25