Advertisement
Thank you for purchasing Jump 1800 portable power station. To make sure your personal safety, property security and user experience, please read this manual carefully before operating, and retain it for the future reference.
Charge it first!
Before reading through the manual, you can begin to charge up your Jump 1800 by connecting it to the AC Adapter provided.
Please use the charger provided to charge the Jump 1800!
Scan to get more information about VTOMAN products
The LCD display will be on when you press any power switch, it will display charge and discharge. When you use this unit, it will display the Battery Power, Available Time (Hours), Power Consumption (Watts), Output Methods.
The current battery power, it is displayed as a percentage (%).
Available time at the current power.
The current total output power.
Press the [DC] button to turn on the DC output function.
Press the [USB] button to turn on the USB output function.
Press the [USB] button and use a type-c to type-c cable to charge other devices, the type-c function icons will appear on the LCD screen.
Press the [AC] button to turn on the AC output function.
Press the [LED] button and the LCD display will be on, press the button one more time to turn on the LED light. There are 5 modes of LED light appear in order (Weak light, Medium light, Strong light, Strobe, SoS) if you press slightly.
Power Switch: Press the power switch to turn on the corresponding output function and press the power switch one more time to turn it off, please turn off the corresponding functions (LED/USB/DC/AC) to save power after using.
![]() Capacity | 1548Wh | ![]() DC Input | 12V-30V (200W MAX) | ||
![]() DC Output | 2 DC output+ 1* Car output: Total 120W | ||||
![]() AC Output | Pure Sine Wave 110V/60Hz, continuous1800W, peak 3600W | ![]() USB Output | 5V/2.4A*3 Quick Charge 3.0*1 | ||
![]() Type-C Output | 2*PD100W (5V3A/ 9V3A/ 12V3A/ 15V3A/ 20V3A/ 20V5A) | ![]() Weight | N.W: 38.5 lbs | ||
![]() Dimensions | 14.17 x 10.63 x 11.02 inch | ||||
![]() Battery | LiFePO4 | ![]() | Pure Sine Wave | ||
![]() Management Sysem | Temperature Protection Over Charge Protection Short Circuit Protection Over-Current Protection Over Discharge Protection | ![]() Operating Temperature | 14°F~113°F | ||
![]() Recharging Temperature | 32°F~113°F | ||||
![]() Lifecycles | 3000 Cycles | LED Flashlight | 12W LED | ||
![]() Warranty | 24 Months | ![]() Certifications | FCC/ CE/ PSE/ RoHS/ UL |
USB Output Port: Smart phones, Tablets, Smart watches, Digital Cameras, e-readers, etc.
12V Cigarette Lighter Socket: Car air pump, Car vacuum cleaners, Car refrigerators, etc.
DC Output Port: Drones, Routers, etc.
AC Output Port: Laptops, Displays, Home appliances, etc.
Type-C Port: Support PD100W max output power for laptops and smart phone, etc.
Before using or storage, if the LCD display shows capacity less than 5%, please recharge the Jump 1800 as soon as possible. Connecting your Jump 1800 to the AC Adapter until it's fully charged. There are three ways to recharge it:
AC Adapter (180W) 8-9 Hours
Car Charger 9-10 Hours
Supports 12~30V solar panels with DC5521 connector The charging time is determined by the solar light intensity.
Use the AC Adapter we provided to charge this unit, the full charge time takes 8-9 hours. When the LCD display shows the battery power of 100%, it indicates that this unit is fully charged.
Use the Car Charger we provided to charge this unit. The full charge time takes 9-10 hours. When the LCD display shows the battery power of 100%, it indicates that this unit is fully charged.
Jump 1800 is designed for jump starting 12V vehicle batteries, Start current: 500A, Peak current: 2000A.
Step 1: Fully plug the blue connector of the clamp cable into the jump starter socket, and make sure the Indicator on the clamp cable is off.
Step 2: Connect Red Clamp to the negative(+) battery terminal and Black Clamp to the negative(-) battery terminal.
Step 3: Operate according to the Indicator on the clamp cable:
GREEN LIGHT on: Telling the connection is correct and the circuit is working, you can turn on the engine to jump start directly.
RED LIGHT on with buzzing: Telling the connection is wrong, and buzzing to alarm to correct the clamps as step 2 mentioned above, wait until the GREEN LIGHT is on to turn on the engine.
GREEN LIGHT blinking: Telling the vehicle battery is low, press the "BOOST" button, wait till GREEN LIGHT becomes solid, then turn on the engine within 30s.
No Lights on, No buzzing: Telling the vehicle's battery may be damaged, after confirming that the clamps connection is correct, press the "BOOST" button, wait till GREEN LIGHT is on, and then turn on the engine within 30s.
Step 4: Start the vehicle.
Step 5: When the vehicle is started, remove the clamp cable from the jump starter first, then remove the clamps from your vehicle battery.
If you need this accessory, you need to buy it separately.
You can connect a standard USB cable to the 5V/2.4A USB output port to charge the smart devices.
It supports 5V to 12V output up to 18W and can power Quick charge 3.0 compatible smart devices. The actual output voltage and current depend on the smart devices.
It supports 5V to 20V output up to 100W and can power type-C compatible smart devices. The actual output voltage and current depend on the smart devices.
Protection Mode
Short-circuit/Over-load Protection: If the DC ports are short-circuited or overload (load power>120W), this unit will turn off the DC output function for self-protection. Resolve short-circuit or overload problems and press the [DC] button to reset from protection mode.
The output voltage of the AC port is 110V and the output frequency is 60Hz. Power the electronic devices with power consumption less than 1800W, such as laptops and displays, home appliances, etc.
Protection Mode
Short-circuit/Over-load Protection: If the AC port is short-circuited or overload (load power>1800W), this unit will turn off the AC output for self-protection. Some appliances like refrigerators and ice makers may require exceed 1800W surge power during startup or operation and this unit may enter overload protection mode. Resolve short-circuit or overload problems and press the [AC] button to reset from protection mode.
Temperature Protection: When the operating temperature reaches 131°F, the fan starts up. If the temperature of this unit is above 194°F, it will turn off the AC output for selfprotection. Please reuse this unit after the temperature drops to the normal.
Noncompliance may very likely lead to serious injury or death.
Noncompliance may lead to serious injury or death.
Noncompliance may lead to injuries and/or property damage.
Intended Use: The Jump 1800 portable power station is intended as a power supply for electronic devices with a maximum power consumption of 1800W. Our product is not suitable to be used with equipment that relates to one's own personal safety and relies heavily on electricity, such as large medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, fires, or machine failures, caused by using our product with the aforementioned devices.
Q1: What type of battery is in Jump 1800?
A: Jump 1800 contains a battery pack which consist of LiFePO4.
Q2: How do I know if my Jump 1800 is charging?
A: Check the LCD Display, if the battery percentage blinks, it indicates the Jump 1800 is charging.
Q3: Can I charge the Jump 1800 while powering other d evcies at the same time?
A: The Jump 1800 could power other devices while recharging itself.
Q4: How do I know if my device will work with the Jump 1800?
A: You need to check the rated power and start power of your devices. This may require some research on your end. An online search or examining the user guide for your device should suffice. To be compatible with the Jump 1800 you should use devices that require less than 1800W.
Q5: What is the maximum output power of 12V DC port or Cigarette Lighter Socket?
A: Cigarette Lighter Socket+2 x DC Ports total output is 120W, if only use the Cigarette Lighter Socket or 1 of 2 DC Ports, the output power is also 120W. Total load power over 120W will trigger the overload protection.
Q6: How to turn off the LCD display of the Jump 1800?
A: Please turn off the AC/USB/DC/LED power switch when the Jump 1800 is not in use. When the AC/USB/DC function icons don't show on the LCD screen, it means all the functions have been turned off, then the LCD display will shut off in 30 seconds.
12+12 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us
contact@vtoman.com (recommend)
For FAQ and More Information
www.vtoman.com
Facebook: @Vtoman2022
Youtube: @Vtoman
Twitter: @Vtoman
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download VTOMAN Jump 1800 - 1800W Portable Power Station Manual
Advertisement
Need help?
Do you have a question about the Jump 1800 and is the answer not in the manual?
Questions and answers