NuTone Roomside AER110LTW Installation And Use & Care Instructions page 5

9. Install blower.
Re-install blower. Secure blower with (2) screws from parts bag and
plug blower into black receptacle.
10. Finish ceiling, then install grille.
Attach MOUNTING PLATE to housing with (2) SCREWS, using the
GRILLE BACKETS installed in step 4.
Connect LIGHT PANEL PLUG to receptacle in corner of housing.
Place LIGHT PANEL SLOT over HOOK on MOUNTING PLATE.
Swing opposite side of LIGHT PANEL up to MOUNTING PLATE
and secure with ATTACHMENT SCREW.
Choose the GRILLE FRAME color you desire from the three frames
included. Squeeze (2) GRILLE SPRINGS and insert them into (2)
GRILLE SPRING TABS.
Push GRILLE FRAME up against the ceiling.
HOOK
MOUNTING
PLATE
ATTACHMENT
SCREW (2)
LIGHT PANEL PLUG
SLOT
GRILLE
SPRINGS (2)
MOUNTING
PLATE
ATTACHMENT
SCREW
LIGHT
PANEL
GRILLE SPRING
TABS (2)
GRILLE
FRAME
RETROFIT
5. Remove old fan.
Enlarge ceiling opening (if necessary)
to 9¾" (parallel to joist) by 10½"
(perpendicular to joist). Leave ductwork
and wiring in place.
1
10½-in.
9¾-in.
6. Fold mounting ears flat
against housing.
JOIST
2
5