NuTone ROOMSIDE Series Installation And Use & Care Instructions
  1. Manuals
  2. Brands
  3. NuTone Manuals
  4. Lighting Equipment
  5. ROOMSIDE Series
  6. Installation and use & care instructions

NuTone ROOMSIDE Series Installation And Use & Care Instructions

Decorative fan-light
Hide thumbs Also See for ROOMSIDE Series:
Table of Contents

Advertisement

Quick Links

ROOMSIDE SERIES
Decorative Fan-Light
Ventilador con luz decorativo
Model number:
Número de modelo:
USE & CARE INSTRUCTIONS
INSTRUCCIONES DE INSTALACIÓN,
© 2019 Broan-NuTone LLC
1102077B
AER110SLW
AERN110SLW
USO Y CUIDADO
English - See page 2
Español - Consulte la página 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROOMSIDE Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for NuTone ROOMSIDE Series

Summary of Contents for NuTone ROOMSIDE Series

  • Page 1 Decorative Fan-Light Ventilador con luz decorativo Model number: AER110SLW Número de modelo: AERN110SLW INSTALLATION AND USE & CARE INSTRUCTIONS INSTRUCCIONES DE INSTALACIÓN, USO Y CUIDADO English - See page 2 Español - Consulte la página 9 © 2019 Broan-NuTone LLC 1102077B...
  • Page 2 Register this product at www.nutone.com/register. For Warranty Statement, or to order Service Parts: go to www.broan.com or www.nutone.com and type the model number in the “Model Search” field. Broan, 926 W. State Street, Hartford, WI 53027 800-558-1711 888-336-3948 Installer: Leave this manual with the homeowner.
  • Page 3 CLEANING & MAINTENANCE For quiet and efficient operation, long life, and attractive SENSOR CLEANING appearance - remove grille and vacuum interior of unit The humidity sensor is mounted in the control housing. The sensor will operate most reliably when cleaned occasionally with the dusting brush attachment.
  • Page 4 ALL INSTALLATIONS 2. Remove wiring panel from fan housing. Start here. COOKING AREA Do not install above or inside this area. NOT FOR USE IN Cooking A COOKING AREA. Equipment Floor 3. A pair of flanges may be IMPORTANT - The ducting from this fan to the outside attached to housing if of the building has a strong effect on the air flow, noise and desired or required.
  • Page 5 7. Connect 4-in. round duct. NEW CONSTRUCTION For Retrofit Installation - Skip to Page 6. 5. Attach damper/duct connector to fan housing. Push connector through opening from inside of housing. Engage tabs and secure with screw from parts bag. 8. Connect wiring. TABS Connect power cable to housing with appropriate UL approved connector.
  • Page 6 9. Install blower. RETROFIT Re-install blower. Secure blower with 2 screws from parts bag and plug 5. Remove old fan. blower into black receptacle. Enlarge ceiling opening (if necessary) to 9¾” parallel to joist) by 10½” (perpendicular to joist). Leave ductwork and wiring in place.
  • Page 7 7. Connect wiring. 9. Connect 4-in. round duct. Connect power cable to housing with appropriate UL Pull existing ducting through housing discharge approved connector. Make wiring connections as shown opening. in “Wiring Diagrams” section. Re-install wiring panel and secure with screw from parts bag. Attach and tape ducting to duct connector.
  • Page 8 WIRING DIAGRAMS WIRING OPTION #1 • When first switch (1) is ON, fan will operate automatically, based on room humidity conditions. • Turn fan ON immediately for the set timer period (to control odors), by cycling first switch. • Use second switch (2) to turn light ON/OFF. •...

This manual is also suitable for:

Aer110slw

Table of Contents