Switching On The Machine And Selecting A Programme; Switching On The Machine; Programme Follow-Up; Changing A Programme - Whirlpool ADP 4209 Instructions For Use Manual

SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME

Switching on the machine

The lamp on Program Start/Pause key
goes off once the Program starts and
the washing/drying lamp is highlighted
Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
As long as Washing and Drying goes
on the Washing/Drying lamp goes on
to light .When drying is active machine
stays silent about 40-50 minutes.

Changing a programme

If you would like to change programs while a washing program is continuing.
Press once the Power
Start/Pause key.
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
.
After the program stops, select
your desired program via the
Program selection button.
53
1. Press the Power On/Off key.
2. Select the program suiting your
dishes via the Program Selection
button.
3. Start the program pressing
the Power Start/Pause key.
Once the program is over, the
lamp Finished is illuminated.
Start the program you have
newly selected by pressing
again the Start/Pause key.
Do not open the cover before
the lamp Finished is on.
The new program started
will resume the course of
the old program.