Gigabyte X670E AORUS PRO X User Manual page 22

8) NOISE_SENSOR (Noise Detection Header)
This header can be used to connect a noise detection cable to detect the noise inside the case.
B S S S
S F
B_
For more information on the noise detection function, please navigate to the "Unique Features"
page of GIGABYTE's website and search for "FAN CONTROL."
Before connecting the cable to the header, make sure to remove the jumper cap; re-place the
jumper cap if the header is not in use.
9) BAT (Battery)
The battery provides power to keep the values (such as BIOS configurations, date, and time information)
in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low
level, or the CMOS values may not be accurate or may be lost.
• Always turn off your computer and unplug the power cord before replacing the battery.
• Replace the battery with an equivalent one. Damage to your devices may occur if the battery is
replaced with an incorrect model.
• Contact the place of purchase or local dealer if you are not able to replace the battery by yourself
or uncertain about the battery model.
• When installing the battery, note the orientation of the positive side (+) and the negative side (-)
of the battery (the positive side should face up).
• Used batteries must be handled in accordance with local environmental regulations.
U
_
_
S _S
_
You may clear the CMOS values by removing the battery:
1. Turn off your computer and unplug the power cord.
2. Gently remove the battery from the battery holder and wait for one minute.
(Or use a metal object like a screwdriver to touch the positive and negative
B_
terminals of the battery holder, making them short for 5 seconds.)
3. Replace the battery.
USB 0_ B
4. Plug in the power cord and restart your computer.
_ _ 3
1
Noise Detection
Cable
1
F_USB3
- 22 -
Pin No. Definition
1
F_USB3 F
2
_ _B _
_
S F_
B_
S S_F
B
F
_
F_
F_
F_USB30 3
_ S
S_
_
B
_ U
_
B
Noise Detection
GND
S _