Gigabyte X670E AORUS PRO X User Manual page 16

Hide thumbs Also See for X670E AORUS PRO X:
Table of Contents

Advertisement

USB 3.2 Gen 2 Type-A Port (Red)
The USB 3.2 Gen 2 Type-A port supports the USB 3.2 Gen 2 specification and is compatible to the USB
3.2 Gen 1 and USB 2.0 specification. Use this port for USB devices.
Line In/Rear Speaker Out (Blue)
The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out/Front Speaker Out (Green)
The line out jack.
Mic In/Center/Subwoofer Speaker Out (Pink)
The Mic in jack.
Audio Jack Configurations:
Jack
Line In/Rear Speaker Out
Line Out/Front Speaker Out
Mic In/Center/Subwoofer
Speaker Out
Front Panel Line Out/Side
Speaker Out
You can change the functionality of an audio jack using the audio software. To configure 7.1-channel
audio, access the audio software for audio settings.
• When removing the cable connected to a back panel connector, first remove the cable from
your device and then remove it from the motherboard.
• When removing the cable, pull it straight out from the connector. Do not rock it side to side to
prevent an electrical short inside the cable connector.
& Please visit GIGABYTE's website for details on configuring the audio software.
https://www.gigabyte.com/WebPage/697/realtek897-audio.html
Headphone/
4-channel
2-channel
a
- 16 -
5.1-channel
a
a
a
a
a
7.1-channel
a
a
a
a

Advertisement

Table of Contents
loading

Table of Contents