Rear Cover Installation (52 Inches); Stand Assy Removal; Stay Top Removal; Stay Top Installation - Sony KDL-40Z5500 Service Manual

2-5. Rear Cover Installation (52 inches)

Clamper Here
To install the 'Rear Cover' push the clamper point as shown
in the photo on the back surface of the 'Rear Cover' then
replace all screws.

2-7. Stay Top Removal

3
To remove the 'Stay Top' place a flat blade screwdriver as
shown by 1 in the photo above, then lift the clamper slightly
as shown by 2 and finally slide the clamper as shown by 3.
When reusing the 'Stay Top' please use with the removed
set.
Push This
Point
1
2
- 12 -

2-6. Stand Assy Removal

= > =>
Remove the 4 stand fixing screws indicated and lift the TV
set up and away from the 'Stand Assy'.
Screw Part number(s) and Description(s)
2-580-608-01 SCREW, +PSW M5X16

2-8. Stay Top Installation

2
To install the 'Stay Top' slide into place as shown by 1 in the
photo above, then push the clamper as shown by 2, making
sure that the embossing on the clamper is locked in the hole
of the panel.
> =
> =
1