Smeg SOPA6302S2PN Manual page 21

6. Close the door.
7. Press the button on the display to modify
the target temperature.
8. Turn the temperature knob to set the target
temperature (for example "80°C").
9. Press the button to confirm the target
temperature set.
10. Press the button to start the function.
The appliance will begin preheating.
You can skip the preheating phase by
holding down the
seconds.
With cooking started:
1. Select a cooking function (for example
"FAN-ASSISTED
2. Turn the temperature knob to set the cooking
temperature (for example "190°C").
91477A113/B
button for a few
").
3. Press the button to start the function.
The appliance will begin preheating.
At the end of preheating:
4. Open the oven door.
5. Insert the tray on which the food has been
placed into the appropriate guides.
6. Insert the plug of the temperature probe into
the socket at the side, using the probe to
open the protective cover.
On the display, the indicator light
on.
7. Close the door.
8. Press the button on the display to modify
the target temperature.
9. Turn the temperature knob to set the target
temperature (for example "80°C").
10. Press the button to confirm the target
temperature set.
11. Press the button to start the function.
End of cooking parameters with the
temperature probe
Cooking ends when the instantaneous
temperature reaches the target temperature set
by the user.
Heating elements are deactivated, an acoustic
signal sounds and the display shows
1. Open the door.
comes
.
USE - 23