Nikon COOLPIX P6000 User Manual page 97

B
Notes on Time-Lapse Movie
• Flash mode (A32), focus mode (A37), and exposure compensation (A40) cannot be adjusted
after the first picture is shot. All frames thereafter will be shot using the same setting. Settings
cannot be changed after shooting starts. Apply the appropriate settings before shooting begins.
• To prevent the camera from turning off unexpectedly during recording, use a fully charged battery.
• To power the camera continuously for extended periods, use an AC Adapter EH-66. Do not, under any
circumstances, use another make or model of AC adapter. Failure to observe this precaution could result
in overheating or in damage to the camera.
• Do not rotate the mode dial during recording of Time-Lapse movies.
The Movie Menu
83