Table of Contents
Advertisement
3.
PRACTICAL GUIDE FOR THE OPERATOR:
3.1.
*IMPORTANT - Seal the battery cells by screwing on the caps.
* Not relevant to maintenance free gel
batteries
3.2. After turning the charger off, unplug the connection lead from the
charger from the battery socket to power the machine.
3.3. Lift the top lid and use a hose or bucket to fill the clean water tank (on
the left) with cold water up to a maximum of 3 cm from the top of
the tank (the water should preferably be cold and in any case never
hotter than 60°C).
IMPORTANT!Use low foam detergent as excessive foam could
jeopardise the efficiency and function of the machine.
Close the top lid, lifting slightly on the hinge side to make sure it fits
perfectly to the tank.
IMPORTANT! If the lid does not fit perfectly, there would be no
vacuum at the squeegeeand therefore no flow-back of liquid to the
collection tank (on the right). If necessary, repeat the operation
correctly.
Avoid resting heavy objects on the lid as this could warp it and
prevent it from fitting perfectly to the tank.
3.4. Make sure the cap of the dirty water tank (on the right) drain hose is
correctly in place. Perfect closure of the cap is essential to obtain a
vacuum in the collection tank and therefore maximum suction
power.
3.5.
Turn the key switch clockwise to start the machine.
6ENGLISH
Advertisement
Table of Contents
