Philips 43PUK7150 User Manual page 66

DVB Settings
Network Frequency Mode
If you intend to use the fast Quick Scan method
in Frequency Scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as
used by most cable operator in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network Frequency
With the Network Frequency Mode set to Manual,
you can enter the network frequency value received
from your cable operator here. To enter the value, use
the number keys.
Frequency Scan
Select the method of searching for channels. You can
select the faster Quick Scan method and use the
predefined settings used by most cable operator in
your country.
If this results in having no channels installed or if
some channels are missing, you can select the
extended Full Scan method. This method will take
more time to search for and install channels.
Frequency Step Size
The TV searches for channels in steps of 8MHz.
If this results in having no channels installed or if
some channels are missing, you can search in smaller
steps of 1MHz. Using the 1MHz steps will take more
time to search for and install channels.
Digital Channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue Channels
If you know your cable operator is not offering
analogue channels, you can skip searching for
analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
Scrambled. If you did not subscribe to pay TV
channels or services, you can select Free
Channels Only .
For more information, press the colour

key Keywords and look up CAM, Conditional
Access Module.
Reception Quality
You can check the quality and signal strength of a
digital channel. If you have your own antenna, you
can reposition the antenna to try and improve the
reception.
To check the reception quality of a digital channel...
1 - Tune to the channel.
2 - Press  .
3 - Select General Settings and press  (right) to
enter the menu.
4 - Select Antenna/Cable Installation and select
Digital: Test Reception .
The digital frequency is shown for this channel. If the
reception is poor, you can reposition your antenna.
To check the signal quality of this frequency again,
select Search and press OK.
To enter a specific digital frequency yourself, use the
remote control digit keys. Alternatively, select the
frequency, position the arrows on a number
with  and  and change the number
with  and  . To check the frequency,
select Search.
If you use DVB-C to receive channels, the
options Symbol Rate Mode and Predefined
Symbol Rates are available. For Symbol Rate Mode,
select Automatic, unless your cable operator gave
you a specific symbol rate value. To enter the symbol
rate value, use the number keys.
Manual Installation
Analogue TV channels can be manually installed,
channel by channel.
To install analogue channels manually...
1 - Press  , select All Settings and press OK.
2 - Select TV Settings and press  (right) to enter
the menu.
3 - Select Antenna/Cable Installation and select
Analogue: Manual Installation .
• System
To set up the TV system, select System.
Select your country or the part of the world where
66