Nikon COOLPIX L810 User Manual page 125

Problem
Images are not displayed on
TV.
Nikon Transfer 2 does not
start when camera is
connected.
Images to be printed are not
displayed.
Cannot select paper size
with camera.
Cause/Solution
• Video mode or HDMI is not correctly set in the TV
settings setup menu.
• Cables are connected to the HDMI mini connector
(Type C) and to the USB connector and audio/video
output simultaneously.
• Memory card contains no images. Replace the
memory card. Remove the memory card to play
back images from the internal memory.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
• Memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from the
internal memory.
• Images captured in 3D photography scene mode
cannot be printed.
Paper size cannot be selected from the camera in the
following situations, even when printing from a
PictBridge-compatible printer. Use the printer to
select paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
A
89, E61
71, 76,
E17,
E20
13
22
21
71, 76
–
73
76
13
13
43
71, E23,
E24
–
F15