Nikon COOLPIX 8400 Manual page 53

Using the ML-L3: Replacing the Battery
The ML-L3 remote control is powered by a three-volt CR2025 lithium battery. To
replace the battery:
1
Unlatch ( ) and remove ( )
battery holder.
3
Insert fresh battery with face
marked "+" on top.
Keep out of Reach of Children
Care should be taken to prevent infants from putting the battery and small parts in their
mouths. Should the battery be swallowed, contact a physician immediately.
The ML-L3 Remote Control
Before using the remote control for the fi rst time, remove the clear plastic battery insu-
lator sheet. Place the remote control in the supplied carrying case when not in use.
"+"
2
Remove used battery.
4
Slide holder into remote until latch
clicks into place.
43