Date Imprint; Firmware Version - Nikon COOLPIX 8400 Manual

Date Imprint

The date imprint option is used to imprint the date or
the date and time of recording on pictures as they are
recorded to the memory card. It can not be used to
imprint a date stamp on pictures after recording.
Option
Off Time and date do not appear on pictures.
Date is imprinted on pictures taken while this
Date
option is in effect.
Date Date and time are imprinted on pictures tak-
and time en while this option is in effect.

Firmware Version

Select this option to display the current camera fi rm-
ware version. Press the multi selector to the left to
return to the setup menu.
Date Imprint
Data imprinted at a size of
be diffi cult to read.
Regardless of the setting chosen, the date is not imprinted in movie (
ma assist ( 31) mode or at an image quality of RAW (
of Continuous H, Ultra HS, or 5 shot buffer (
Imprinted data form a permanent part of the image and will
appear whenever the image is printed, regardless of whether
the date option is chosen in the Print set menu. At settings
other than Off, a date imprint icon appears in the shooting
display during shooting. Check before shooting to make sure
that the camera clock is set to the correct time and date.
The date is recorded in the order selected in the DATE menu. Date imprint can not be
selected if the camera clock has not been set (
142
Description
(640 × 480), (1,024 × 768), or
15–16).
Date imprint
DATE IMPRINT
Firmware version
E 84 0 0 Ve r . 1 . 0
(1,280 × 960) may
33) or Continuous settings
88).
1/60 1/60 60
Off
Date
Date and time
Back
58) or panora-
8M 8M 8M
F2.6 F2.6 F2.6 126 126 126