Installation Instructions - Rinnai RRSH2 User Instructions

Installation Instructions

Installation Position
Install the appliance in a well-ventilated room but not at the passage of strong wind. Keep it away from
any flammable objects (such as paper, oil), sprays or pressurized containers. The appliance should be
installed with a distance of more than 150mm away from surrounding combustible materials. Allow
650mm or more clearance above appliance. If range hood is installed above the appliance and it has
different installation requirement of separation, adopt the larger value.
Appliance Installation
Position the appliance onto the bench-top. Ensure the bench-top is stable and flat.
Gas Connection
Connect the gas appliance to the gas supply according to the prescribed standards in force, and ensure
that the appliance matches with the type of gas supply. Furthermore, check that the supply pressure is
2.9 kPa.
Attention:
The gas connection is ⅜" ( 8.8mm) hose end for RRSH2.
Use approved gas tubing for connecting to appliance. Flexible tubing must not be longer than
2000 mm. Tubing shall not touch any moving parts, be kinked or compressed. After connection ,
check gas soundness of piping. Never use naked flame for checking.
Completing Installation
Make sure that all the parts are fitted
Flame failure device
Pan support
Top plate
Simmer burner cap
Outer ring burner cap
Flame control knob
Appliance leg
3