Important Safety Instructions - Rinnai RRSH2 User Instructions

The following instructions are very important to safe operation of gas appliance. Please read through them
carefully. Please contact Towngas LPG Appliances Sales Enquiry and Service Hotline on 2232 1111 for
enquiry. Please contact appliance vendor or Towngas Company for service.
Installation
1. Use approved gas tubing bearing EMSD approval marking (such as: 機電工程署批准 EMSD
APPROVAL GTXXXX) or other appropriate methods accepted by EMSD.
2. Do not store any combustible materials, e.g. paper and plastic, under or near the appliance. The
appliance should be installed with a distance of more than 150mm away from surrounding combustible
materials.
3. Install the appliance in a well-ventilated room.
Operation
1. In case of suspected gas leak, open windows and shut off main gas valve. Do not operate any electric
appliances or switches. Do not use any phones on site. Contact gas supply company or Towngas 24-
hour Emergency Hotline on 2880 6911 with a phone outside the premises.
2. Please use the appliance properly according to the operation instructions.
3. This appliance is designed for domestic use only. Do not use it for commercial purposes.
4. Do not use the appliance for any purposes other than cooking, e.g. drying clothes.
5. Open windows and turn on ventilation system before operating the appliance.
6. Do not allow kids to use appliance.
7. Do not leave operating appliance unattended.
8. Do not add aluminum discs to burner. This will incur combustion problem.
9. Ensure that burner caps are not deformed. Contact appliance vendor or Towngas Company to
replace the parts if abnormality is found.
10. Before use, ensure the burner caps and pan supports are in correct position and not tilted.
11. Ensure that flame holes of burner are free from water and dirt.
12. Do not put weight exceeding 10kg on pan support.
13. Pan support is heavy. Do not drop it.
14. Make sure that flame condition is uniform during operation.
15. Heed high temperature of top plate, burner and pan support.
16. Do not use flat bottom pot of diameter larger than 300mm to avoid the risk of scald by high
temperature and reduce the service life of the appliance.
17. When using small utensil, reduce flame power that flame does not escape from utensil bottom.
18. Ensure stability of utensil resting on pan support. Hold utensil firmly if it slips easily.
19. Do not fill water including soup ingredients over two-thirds of utensil volume when boiling water or
soup. Spilled liquid of boiling will affect combustion and damage the appliance.
20. Always use pots with a cover and make sure that the handles of the pots are correctly positioned to
avoid heating and collision of handles.
21. Do not use sprays near the appliance.
22. Flame control knob should be turned to off position "" after use.
23. Clean burner caps regularly to ensure smooth passage of burner flame holes. In case of cooking
spillage, clean appliance properly once it cools down.
24. If abnormal noise is observed, turn off flame. Check placement of burner caps and place them
correctly after appliance cools down. Contact appliance vendor or Towngas Company for inspection if
problem persists.

Important Safety Instructions

1