Brother HL-L2460DW Product Safety Manual page 10

Power Cord Safety:
• This product is equipped with a grounded plug. This plug will only fit into a grounded power
outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your
electrician to replace your obsolete outlet. DO NOT attempt to defeat the purpose of the
grounded plug.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this product where others might step on the cord.
• DO NOT place this product in a position where the cord is stretched or strained as it may
become worn or frayed.
• DO NOT use the product if the power cord is frayed or damaged. Doing so may cause an
electrical shock or fire.
• DO NOT pull on the middle of the power cord; pulling on the middle may cause the cord to
separate from the plug. Doing this might cause an electrical shock.
• DO NOT use any undesignated cables (or optional devices). Doing so may cause a fire or
injuries. Installation must be performed correctly according to the Quick Setup Guide.
• Brother strongly recommends that you DO NOT use any type of extension cord.
• This product should be positioned so that nothing pinches or constricts the power cord.
• DO NOT use cables that do not meet the cable specifications described in the
Specifications and Supplies. Doing so may cause a fire or injuries.
• If the power cord is provided with this product, use ONLY the provided cord. Installation
must be performed correctly as described in the Quick Setup Guide.
When you move the product, carry the product as shown in the illustration.
CAUTION
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.
10