D02SUH001-00
USA/CAN
Version 0
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
Toner Cartridge and Drum Unit
AC Power Cord
1
Remove the packing materials and install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
Connect the power cord and
3
turn the machine on
Back
NOTE:
Before connecting the power cord, locate the Serial Number
label on the back or side of the machine. Record this number
for product registration and warranty support.
Quick Setup Guide
HL-L2405W / HL-L2460DW / HL-L2460DWXL / HL-L2865DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Toner Cartridge Replacement
Assembly
Quick Setup Guide
1
Adjust the paper
Front
NOTE:
• Manuals in Spanish for this model are available at support.brother.com.
• The components included in the box may differ depending on your
• The available connection interfaces vary depending on the model.
(HL-L2460DWXL only.
Save for later use.)
Product Safety Guide
• The screens and images in this Quick Setup Guide show the
• Save all packing materials and the box in case you must ship your
2
1
Remove the orange part.
Do not exceed this mark.
guides.
4
Select your language (if needed)
1.
Press ▼ or ▲ to select [Initial Setup], and
then press OK.
2.
Press ▼ or ▲ to select [Local Language], and
then press OK.
3.
Press ▼ or ▲ to select your language, and then
press OK.
Manuales en Español para este modelo están disponibles en
support.brother.com.
country.
If you use a wired connection, you must purchase the correct cable for
the interface you want to use.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
HL-L2460DW.
machine.
Push firmly.
Need help?
Do you have a question about the HL-L2405W and is the answer not in the manual?
Questions and answers
how can I setup the HL-L2405W printer in order to run it as a wired connection from my desktop computer instead running it wireless?
To set up the Brother HL-L2405W printer for a wired connection to a desktop computer:
1. Use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long.
2. Connect one end of the USB cable to the printer and the other end to your desktop computer.
3. Turn on the printer.
4. Install the necessary drivers and software on your computer if they are not installed automatically.
5. Follow any on-screen prompts to complete the setup.
Make sure the printer and computer are powered on during the process.
This answer is automatically generated
Can I set up the hl-L2405w as a wired connection
How do I make a single copy with the brother HL-l2405w printer