HOW TO USE THE MICROWAVE
2. Once you have turned the dial to select the appropriate setting, press the
'Start/+30Sec./Confirm' button to confirm.
3. Turn the ''Time/Weight/Auto Menu' dial to choose the food weight, these
are pre-set and listed in the above table.
4. Press the 'Start/+30Sec./Confirm' button to commence cooking.
Make sure you monitor cooking progress as times can vary. Allow the food to
stand in the microwave for 1-2 minutes after the cooking cycle is complete.
Multi-Stage cooking function
For some recipes, results may be better if you wish to cook on different
power levels for different times, for one dish.
Note:
This can be used to set a maximum of two different stages. The auto
menu cannot be set as one of the multi-stage cooking functions.
For example, if you wanted to
microwave power for 7 minutes - the steps are as follows:
1. Press the 'Weight Defrost' button once – the screen will display 'd01'
2. Turn the 'Time/Weight/Auto Menu' dial to adjust the defrost weight to
500g.
3. Press the 'Power' button once.
4. Turn the 'Time/Weight/Auto Menu' dial to choose 80% microwave power
until the display shows 'P80'.
5. Press the 'Start/+30Sec./Confirm' button to confirm.
6. Turn the 'Time/Weight/Auto Menu' dial to adjust the cooking time to 7
minutes.
7. Press the 'Start/+30Sec./Confirm' button to start the cooking process.
defrost 500g of food, then cook it at 80%
24