Table of Contents
Advertisement
F:\Works\5027260111\5027260111AX3210UC\01GB-AX3210UC\040CD.fm
010COV.book Page 15 Wednesday, December 9, 2020 5:36 PM
Cautions
• It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
• If airbags or any other shock-absorbing
equipment are in your car, contact the store where
you purchased this unit or the car dealer before
installation.
Notes
• When mounting on the dashboard, remove the visor clip
carefully from the microphone , then attach the flat-
mount base to the microphone .
• Before attaching the double-sided tape , clean the
surface of the dashboard with a dry cloth.
Using the wired remote control
When using the steering wheel remote
control (XAV-AX3200 only)
Installation of the connection cable RC-SR1 is
required before use.
1
To enable the steering wheel remote control, select
[General] [Steering Control] [Custom]
make the registration.
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable RC-SR1
• Before installing, turn on the car ignition then check that
the steering wheel control buttons are working correctly.
• Refer to the support site for details then connect each lead
properly to the appropriate leads. Making an improper
connection may damage the unit.
URL: https://www.sony.com/am/support
• Consulting the dealer or an experienced technician for
help is recommended.
When using the wired remote control
1
To enable the wired remote control, set [Steering
Control] in [General] to [Preset].
Using an A/V device
Installation of a mini-jack A/V cable (not supplied)
is required before use.
1
Connect the installed mini-jack A/V cable to
the Video Output terminal of the A/V
device.
Do not connect to the Video Input terminal of
the A/V device.
2
Press HOME, then touch [A/V IN].
CAUTION
Be sure to use a mini-jack AV cable (not supplied)
for wiring. Using other cables with different wiring
positions might result in disturbed images and
sound.
L
R
G
V
to
L: Left audio (White)
R: Right audio (Red)
V: Video (Yellow)
G: Ground (earth)
Notes
• Only connect to the A/V IN terminal of this unit. Do not
connect to other terminals, such as MIC IN or REMOTE IN.
• Refer to the instructions supplied with your A/V devices for
details about connecting and using the A/V device.
Using the rear view camera
Installation of the rear view camera (not supplied) is
required before use.
The picture from a rear view camera connected to
the CAMERA IN terminal is displayed when:
– the back lamp of your car lights up (or the shift
lever is set to the R (reverse) position).
– you press HOME, then touch [Rear Camera].
masterpage: Right
L
V
G
R
15
GB
XAV-AX3210/XAV-AX3200
5-027-260-11(1)
Advertisement
Table of Contents
