Inserting The Batteries Into The Remote - Toshiba 50QF5D53DB Quick Start Manual

1
Building and fitting stand
2

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compartment on the back side of the remote control first. Insert
two 1.5V - size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity).
Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on.
To pair remote with the TV
When TV is turned on for the first time, a pairing process for your remote will be performed during the initial
setup. Your remote control should automatically pair with your TV at this point, but if it didn't, follow the on
screen instructions to pair it. If you experience difficulties pairing your remote with your TV you can turn off
other wireless devices and try again.
x 2
In order to prevent injury and maintain
stability of this TV, secure it to a wall
(or to another immovable structure), as
shown in the illustration, using a sturdy
strap and the P clips. Make sure the
strap is secure and parallel to the floor.
English - 1 -