Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Jumpflex PROJAM UK FLEX Series
Summary of Contents for Jumpflex PROJAM UK FLEX Series
- Page 1 Version PJ1.0 PROJAM™ UK FLEX Series Assembly Manual...
- Page 2 Warning: Read all assembly, installation, care maintenance and usage instructions in the manual prior to assembling and using the Jumpflex® product. These products are for personal use only by one person aged 6 years and older. These products are for outdoor use only.
- Page 3 Contents PROJAM™ Parts List Setup Assembly Instructions PROJAM™ Hero Series Assembly Manual...
- Page 4 PROJAM™ Parts List Part Description Quantity Backboard and Hoop Fibreglass Rod Connector Fibreglass Rod End High Mount Cross Bracket Basketball Ball Pump PROJAM™ Adapter PROJAM™ UK FLEX Series Assembly Manual...
- Page 5 Setup High Mount Ideal for big jumpers and big air slam dunks! PROJAM™ UK FLEX Series Assembly Manual...
- Page 6 High Mount Assembly Instructions Lay the Backboard and Hoop (1) face down. PROJAM™ UK FLEX Series Assembly Manual...
- Page 7 Join together 4x Fibreglass Rod Connectors (2) and 4 x Fibreglass Rod Ends (3). PROJAM™ UK FLEX Series Assembly Manual...
- Page 8 Thread one connected fibreglass rod assembly through the webbing loop on the backboard and into the bottom corner pocket. PROJAM™ UK FLEX Series Assembly Manual...
- Page 9 Repeat step 03 on the other side. PROJAM™ UK FLEX Series Assembly Manual...
- Page 10 Insert each end of the fibreglass rods into the High Mount Cross Bracket (4) as shown. PROJAM™ UK FLEX Series Assembly Manual...
- Page 11 Thread another fibreglass rod assembly into the High Mount Cross Bracket (4) and insert the other end into the corner pocket. PROJAM™ UK FLEX Series Assembly Manual...
- Page 12 Repeat step 6 on the other side. Pull the corner of the backboard away from the center and pre-bend the fibreglass rod to create enough space to insert the rod into the corner pocket. PROJAM™ UK FLEXSeries Assembly Manual...
- Page 13 Attaching to your Jumpflex® Trampoline Select any of the enclosure net poles on your trampoline where you would like to position the PROJAM™. Unclip the fibreglass net ring pole and remove the plastic hook from the upper net pole. PROJAM™ UK FLEX Series...
- Page 14 Attach the PROJAM™ adapter by clipping it onto the upper net pole. Clip the fibreglass net ring pole into the plasic hook. Remove the top screw cap and fasten the PROJAM™ bracket to the adapter. PROJAM™ UK FLEX Series Assembly Manual...
- Page 15 Adjust the hoop straps to ensure the hoop is sitting horizontally. PROJAM™ UK FLEX Series Assembly Manual...
- Page 16 Use the provided Ball Pump (9) to inflate the Basketball (8). PROJAM™ UK FLEX Series Assembly Manual...
- Page 17 Enjoy! PROJAM™ UK FLEX Series Assembly Manual...
- Page 18 Canada ph. 1866 305 7238 ph. 1866 305 7238 ph. 0330 010 4301 www.jumpflex.com www.jumpflex.ca www.jumpflex.co.uk New Zealand Australia ph. 0800 586 735 ph. 1800 586 735 www.jumpflex.co.nz www.jumpflex.com.au...
Need help?
Do you have a question about the PROJAM UK FLEX Series and is the answer not in the manual?
Questions and answers